For editors and owners
Reports and tasks (Buddy Pro)
Ask about your data in Buddy's window and get a short report with tables, as a PDF or an Excel file — or ask Buddy Pro to do the work, after you confirm it: people and apps, loading and changing data, orthophotos, 3D models, terrain and flight plans, repeating reports, map sheets, Projects tasks and meter reports.
Reports from your data are made by Buddy Pro, in the same window as Buddy. Ask in your own words — in English, Portuguese or Hebrew — and Buddy Pro reads your layers, counts and sums what is asked, and answers with a few sentences and small tables. A report changes nothing.
Buddy Pro can also do some of the work for you — invite people, change roles and access, make an app (Tasks Buddy Pro does for you); name who edits which layers (Who edits which layers); load a file into a layer, change values, join a table, geocode addresses or make a layer by analysis (Tasks with your data); make an orthophoto, terrain products or a flight plan (Imagery and flights); load a survey's 3D models into an app (3D models); send repeating reports, print map sheets, make tasks in Projects and report on meters (Repeating reports, map sheets, Projects and meters) — always after showing you exactly what it will do, and waiting for you to press Confirm. Who may ask for tasks is the owners' choice (Who can use it).
Some questions it answers:
- "How many parcels over 1,000 m² have no owner name yet?"
- "Summarise the water pipes: total length by diameter."
- "Which ten buildings are the largest in the north zone?"
- "What changed in the parcels layer since 1 October?"
Tasks Buddy Pro does for you
Ask Buddy Pro to do a task in your own words, for example:
- "Make accounts for these people as viewers of the Parcels app: anna@example.org, dan@example.org" — or paste a table, or add an Excel or CSV file with a column of e-mail addresses (and names, if you have them).
- "Change Anna's role to editor", "Give Dan access to the Water app", "Take Dan's access to the Water app away".
- "Send Anna's invitation again", "Cancel Dan's invitation".
- "Who can open the Parcels app?"
- "Make an app called Roads 2026 with the roads and bridges layers".
Every task goes the same way:
- Questions. Buddy Pro asks for whatever is missing, one short question at a time — which apps, which role, whether to send the invitation e-mails now or hold them, which data, which basemap. The choices are only what you may choose: the apps you manage, the roles you may give, the people you may change and the data you may use. Nothing is ever offered beyond your own rights.
- Preview. Before anything is done, Buddy Pro shows exactly what will happen: the people, the apps and the role; who is already in the workspace; whether the plan has enough seats; how the invitation e-mails go out; an app's layers in order, which are on when it opens, its basemap and where it opens. You can move a new app's layers up and down and switch them on or off; the preview is made again each time.
- Confirm. Nothing is changed until you press Confirm. A preview can be confirmed once, by you, within 15 minutes; Cancel drops it.
- Done. The task is carried out with your own rights, exactly as if you had made each click yourself, and the result is shown in the window. Where the task allows it, Undo puts it back: a role changed, access given or taken away, invitations made (they are cancelled; the people stay listed until you take them off in People). An app made by Buddy Pro is changed or removed in Studio.
Tasks count in the workspace's Buddy Pro usage, as Buddy Pro's answers do; the window does not show what each one uses. The month's usage is on the Plan page, and the workspace's owners see who used how much on Studio → Usage (see Tokens). A task's details (for example the e-mail addresses and names of the people invited) are kept for 30 days, for Undo and the record, then deleted.
Each task is recorded in Studio → Activity as "Buddy Pro for" the person who confirmed it, next to the lines the task itself writes. Buddy Pro never confirms anything for you: text inside your data, a file or a list of e-mail addresses can only fill in a preview, never change anything by itself. When Buddy Pro itself suggests a task you did not ask for in so many words, its card says Suggested by Buddy Pro, and only what you wrote yourself is filled in. If something changed after the preview (a person's role or apps, your own rights), Confirm does nothing and says so; Undo puts back only what the task changed, and leaves anything changed since by somebody else as it is. Up to five previews can be open at once; an older one is dropped.
A done task's line in the window says about how much time it saved, a cautious estimate of the same work done by hand. It may also offer the next task: after a delivery of orthophotos is in its app, loading the delivery's 3D models; after inviting people, giving them access to an app; after making an app, inviting people to it. A click only puts those words in the box: nothing is done until you send them, and then the task goes through its own preview and Confirm. When you do the same work by hand several times in a row — adding people one by one, correcting names, changing one field feature by feature — a short line at the bottom of the page may offer Buddy Pro for the rest; it only opens the task, at most once a day, and Don't show again turns it off.
When a task stops because a plan allowance is used up (this month's orthophoto images, or Buddy Pro's own), Buddy Pro says so and never turns extra usage on itself: an owner gets Allow extra usage, which opens the extra usage switch on the Plan page, and once it is on, Run it now prepares the same task again for a new preview and Confirm; anyone else is asked to have a workspace owner allow extra usage.
Tasks are not done while you view the workspace as someone else, nor while the workspace is read-only or suspended. Invitations follow the workspace's usual rules: held invitations wait until they are sent from Studio → People, one person sends at most 60 invitations an hour, and nobody is invited beyond the plan's seats. When you make a new app, only data you see in full can be put in it.
Tasks with your data
Buddy Pro also works with the data of your apps, in the same way — questions, a preview, Confirm, the result, and Undo:
- Load a file into a layer. "Load this shapefile into a new layer." Add a zipped shapefile, a DWG or DXF drawing, a KML or KMZ, a GeoJSON or GeoPackage, or a CSV or Excel file with coordinate columns (at most 100 MB). Buddy Pro reads the file and asks which app, whether it becomes a new layer (in My layers, or among the app's layers where you may add layers, and in which folder) or is added to a layer you may change, its name, and its coordinate system when the file does not say it. The preview shows the number of features, their shape, the fields and where they go; when you add to a layer, which fields of the file match the layer's and which are left out. A new layer is loaded in the background and appears when it is ready. Undo removes the new layer, or the features added (those nobody has changed since).
- Change values. "Set STATUS to done where TYPE = road", or for the features selected on the map, or for every feature of a layer. Only the layers you may edit, only the fields you may change and only the features you reach are used; a field filled in by itself (who made a feature and when) is never changed. The preview shows the number of features and, for the first ones, the value before and after. One task changes at most 5,000 features; for more, narrow the condition. Undo puts the old values back on the features nobody has changed since.
- Join a table to a layer. "Join this Excel to the parcels layer by parcel ID." Add an Excel or CSV file (at most 2 MB, 5,000 rows); Buddy Pro asks for the layer's field and the table's column that match, and which columns become new fields (up to 10). The preview shows how many features found a row, the rows that found none, and the new fields with their values for the first features. Adding fields to a layer is for the people who manage the app's layers and reach all of the layer's data, as adding a field from the table is (see Fields in the attribute table). One task writes into at most 2,000 features. Undo removes the new fields and their values.
- Geocode addresses. "Put these addresses on the map as points." Add an Excel or CSV file with a column of addresses (up to 500 a task). The addresses are looked up with the platform's address service, and the preview shows how many were found and which were not. The found ones become a new point layer with the table's columns, the address as it was found and its match score. One person looks up at most 2,000 addresses a day. Undo removes the layer.
- Make a layer by analysis. A buffer ("buffer the wells by 50 m"), a clip ("the roads inside the municipality"), an intersection ("parcels intersected with the flood zone", with the fields of both), the features within a distance of another layer ("parcels within 50 m of the sewage line"), or a dissolve by a field ("dissolve the parcels by owner"). Only the layers you may see in the app are used, only their features you reach and only their fields you may read. The preview shows the number of features and their total area or length. One analysis reads at most 20,000 features of each layer, makes at most 20,000, and is stopped after 20 seconds; for more, use a smaller area. The result is a new layer in My layers or among the app's layers; among the app's layers it carries only the fields everybody in the app may read, and the result of a layer kept to chosen people goes to My layers only. Undo removes it (a layer among the app's layers only while nobody has edited it and no other app shows it).
Layers kept from AI (Not for AI) are never used. A file you add for a task is kept for an hour for that task only, counts towards the workspace's storage while it is kept (at most five at a time per person), read by the server for the preview, and never by the AI: what is in it can only fill in a preview.
Imagery and flights
Buddy Pro also processes drone photos, makes terrain products and plans survey flights, in the same way — questions, a preview, Confirm, the result, and Undo. The processing runs in Cartema, exactly as Make orthophoto in Fly; nothing is ever flown.
A delivery of orthophotos from a supplier — an archive of sheets and surface models — goes in the same way: attach it and write, for example, "load these orthophotos into Cedar Valley". Buddy Pro shows where each sheet goes (its section, a new section, the DSM folder) and places it after Confirm; Undo removes what it placed and the images. See Upload a delivery of orthophotos.
- Make an orthophoto. "Make an orthophoto from the photos of flight 3." Use the photos of a flight in an app where you change data, or send the photos now (JPEG, up to 300, at most 60 MB each; a flight is made for them in the app's Fly panel). Buddy Pro asks once about reference points: the flight's own marked control points, a ground control file (OpenDroneMap's
gcp_list.txt, each point marked in three photos or more), the drone's own positions only (an RTK drone, or the GPS in the photos), or none. It goes without reference points only when you say so, and only for that task. Then what comes out — the orthophoto and the surface model (DSM), with a terrain model (DTM), or with contours too — how detailed (quick look, standard, high detail), and whether the new layers go among the app's layers or stay in Studio's data. The preview shows the photos, the area, the reference points, what will be made, the estimated processing time and the plan's orthophoto images. - The plan's orthophoto images. Your plan includes a number of orthophoto images a month. A task uses them first. Past them, a task follows the same rule as Fly's own button: the preview says how many photos are past the month's images; with pay as you go on, the processing carries on past the plan, as the owners chose on the Plan page; with it off, a run that starts inside the allowance still goes ahead; once the month's images are used, processing waits until next month or until an owner changes it on the Plan page.
- Follow the run. The result card says how the run stands — waiting, being processed, each layer ready — while Buddy's window is open. Undo cancels the run while it waits; once it has finished, it removes the layers it made (and a flight it made for photos you sent, or control points it added). A run that is being processed is not stopped half way.
- Terrain products. "Make contours every 1 m from the DSM", "a hillshade of the terrain model", "the volume between the two surveys inside the pit". From a surface or terrain model of the app (its layers, and its flights' models) that you reach: contours at an interval, a hillshade, or the volume between two surfaces inside an area — the map's selected polygons, the polygons of a layer (the features you reach), or wherever both surfaces lie. The result is a new layer; for a volume, the cut, the fill and the net volume appear in the result card once measured. Undo removes the new layer once it is made.
- Plan a flight. "Plan a flight over this block at 80 m." From coordinates you type (latitude, longitude of each corner), the map's selected polygon, or a layer's polygons. Buddy Pro asks for the drone, the height (with the ground resolution it gives), the overlap, the speed and the camera angle, and shows the number of photos, the flying time and how many flights (one battery each) it takes, and the weather windows fit to fly when Weather is on for the workspace. The result is a DJI Pilot 2 mission (WPML, a .kmz file for each flight) for the drones that take one, and a KML of the whole plan; saved in the app's flights (Fly) when you change data there, put in My layers, or only the files to download. Undo removes a saved plan while nothing was flown with it.
Photos and files you send are read by the server for the preview and never by the AI. Layers and rasters kept from AI (Not for AI) are never used. A task that makes new layers is for the people who reach all of the workspace's data: for somebody who works on some apps only, the new layers would be out of their own reach.
3D models
3D models of a survey — a photogrammetry mesh of a line, a site or a town — are loaded into an app by Buddy Pro alone. Attach the archive (ZIP, RAR or 7z) as the survey's supplier sent it and write, for example, "load these 3D models into Cedar Valley":
- What the archive holds. Bentley ContextCapture "Webready" 3MX exports — one folder per section,
<name> Webready H_01with itsScenefolder (the viewer folder beside it is not needed) — or 3D Tiles sets already converted (a folder with itstileset.json). Several sections in one archive are fine, up to 60; an archive may be up to 8 GB unless the platform sets another limit, and must fit in the plan's storage. - The preview. Buddy Pro reads the archive's names and each scene's own file, nothing else, and shows each model: its name, its day (from its names, else the archive's name, else the file's own date), its size, and where it goes — the app's 3D models panel, in its section's row, with its day to choose among the section's days. A model of a section and day the app already has takes that model's place (Replaces); any other is added. A scene that cannot be loaded is named with why (no coordinate system, a scene file that does not read, a second model of the same section and day). Everything new starts switched off when the app opens. The preview also says about how long the conversion takes.
- After Confirm. The models are converted on the platform's server into 3D Tiles — the format the map draws — and stored in your workspace; the result card follows each one (converting, ready, or why it could not be loaded). They go into the app together, as one new version of it, once all are ready. If the app's 3D models of those sections and days changed in the meantime, nothing is added and the card says so; ask again for a new preview. A model that fails does not stop the others.
- Undo takes out exactly the models this task added, with their files, and puts back the models it replaced. It waits until the conversion is done. A day after the task, the replaced models' own files are deleted unless another app still shows them.
- Who can. The people who change an app's 3D settings in Studio: the workspace's owners, administrators and editors on the apps they open. Where the workspace keeps everyone but its owners to data, an app's 3D models are part of its structure: only the workspace's owners and administrators load them.
- From Studio's upload. An archive of 3D models uploaded through Studio → Datasets → Import a file is refused there, since 3D models are not a plain upload. Where Buddy Pro's tasks are yours, the refusal offers Load it with Buddy Pro: the window opens on this task with that very archive, without uploading it again (up to 5 GB; a larger one is attached in the window). In the same way, a delivery of orthophotos imported in Studio and placed in no app offers Place these in an app with Buddy Pro.
Who edits which layers
Tell Buddy Pro, in one message, who edits which layers or folders — in one app or several at once:
- "Let Anna Levi and Dan Cohen edit the Pipes and Meters layers in the Northfield and Southfield apps."
- "Dan Cohen no longer edits the Water folder in Northfield."
- "Let Anna Levi edit the Parcels layer in Northfield, and switch editing on."
- "Deixa a Ana editar a camada Rede na aplicação Northfield", "תן לענת לערוך את שכבת הצנרת באפליקציה צפון".
Buddy Pro names them as the layers' Named editors, exactly as a layer's Rights window in Studio does (see Named editors), and only where you may name them yourself: in apps whose layers you manage and whose data you change. Somebody who manages an app without changing its data names nobody, here as in Studio. A folder means every layer in it.
- Names. People are found by their name or e-mail address, layers and folders by their name or their path in the app ("Water / Pipes"). A name Buddy Pro cannot find, or one that more than one person or layer carries, is asked about with a list to choose from: it never guesses.
- The preview shows, for each app and person, the layers they will edit, those already so (also through a folder above them), and anything not done with the reason: somebody who does not open the app, or who already edits all of it because they manage its layers. Image layers have no features to edit and are left out. To take people off, it lists the layers they are taken off.
- Editing in this app decides first. If it is off in an app, the preview says so; Buddy Pro switches it on only when you ask for it in so many words, and only if you may switch it yourself on the app's page. Layers not marked Editable are listed too: named editors edit them once they are.
- Seats. Somebody named takes an editor seat of the plan, as in Studio; the preview says how many are free.
- Confirm names them through Studio's own action, asking every right again; if a layer's names changed since the preview, nothing is done. Undo puts back exactly who was named on each layer or folder before, and switches editing off again where the task switched it on — as long as nobody changed them since.
A field's allowed values from its style
When a style already colours a layer by a field's values, Buddy Pro can make those values the field's Allowed values — the list editing then offers, and the only values it takes:
- "Set the allowed values of Status in Assets from its style."
- "Make the Kind field a dropdown from the style's categories."
- "Definir os valores permitidos do campo Estado a partir do estilo", "קבע ערכים מותרים לשדה סטטוס מהסגנון".
It does what Take from the style's categories does in a field's Rules (see Adding and editing fields), and saves the field's settings through Studio's own action, so only the people who set a layer's fields in Studio can use it: the workspace's owners, administrators and editors, on layers they reach whole. Fields that look like people's personal data, and fields shown to the workspace's team only, are never offered.
- Names. The layer is found by its name, the field by its name or label. When the words name none, or more than one, Buddy Pro asks with a list to choose from; when more than one style colours the layer by that field with different categories, it asks which style.
- The preview shows the values in the style's order with their labels, the list it replaces if the field had one, and how many features hold a value that is not on the list today — a count, never the values. Those features keep their value until somebody changes it. A list the field's own rules would refuse (a default value not on it) is refused in the preview.
- Confirm saves the list, asking every right again; if the field's list changed since the preview, nothing is done. Undo puts back the list the field had before (none, if it had none), as long as nobody changed it since.
An undo — this task's or any other — may bring back a value a feature held before a list was set, even if that value is not on the list: only that very value, never a new one.
A 3D model's place in its panel
An app's 3D models panel lists its models newest first: a model added to it goes in by its day, above the older ones. To move one — or put the whole panel in date order again — tell Buddy Pro:
"Put the 3D model I uploaded yesterday to Cedar Valley at the top."
"Move the Cedar Valley 2025 model one place down."
"Sort Cedar Valley's 3D models by date."
"Põe no topo o modelo 3D que carreguei ontem em Cedar Valley", "הזז את המודל שהעליתי אתמול לעמק הארזים לראש".
Which model. By its name or its section; or "the one I uploaded" — your own load of 3D models into that app, "yesterday" or "today" narrowing it, never somebody else's. When the words name none, or more than one, Buddy Pro asks with a list, newest first.
The preview shows the panel's new order — each model's place, name and date, and the place it had — and says where the model goes. Nothing else changes: no model is switched on or off, and their files stay as they are.
Who can. The people who change an app's 3D settings in Studio, as for loading 3D models above. Confirm writes the new order as Studio's own arrows do, asking every right again; if the panel changed since the preview, nothing is done. Undo puts the order back, as long as nobody changed it since.
The same is done by hand in Studio: the app's 3D models (the arrows on each row, Sort by date), or Find content.
Finding content, and a layer at open
Buddy Pro tells you which apps use a layer, an image or a 3D model, and what was added lately or by whom — what Find content would list, without the list:
- "Where is the layer Street lights used?" — "Which apps use the orthophoto 28.10.2026 North Depot?"
- "What 3D models were added this week?" — "What did Dana upload to Cedar Valley?" — "What did I upload yesterday?"
- "איפה משתמשים בשכבה קו תאורה?", "Que modelos 3D foram adicionados esta semana?"
Each item comes with its type, where it is used (the app, its folder, on or off at open), when and by whom it was added and its size, with Open in the app's map and a link to Find content filtered to it. A long answer gives the count and the first ten, with Find content filtered to them all. It lists only what Find content shows you: the apps you open, the data within your reach, and who added something only as the Jobs page would show it.
It also does the finder's switches, with a preview, Confirm and Undo:
- "Turn Street lights off at open in Cedar Valley." — "Switch the 2025 model on at open." — "Remove the DTM expansion from Cedar Valley."
- Who can. The people who change an app's layers' settings in Studio — not someone kept to data (they add data and nothing else). Confirm saves the app as Studio does, asking every right again; if the layer changed since the preview, nothing is done. Undo puts the app back to its version before, as long as nobody changed it since.
- Taking a layer out of an app leaves its data in the workspace and in the other apps that draw it. Buddy Pro never deletes a layer or its data: a deleted layer cannot be brought back, so to delete a layer, use Delete in Find content yourself.
Repeating reports, map sheets, Projects and meters
Buddy Pro also sends reports on a schedule, prints map sheets, makes tasks in Projects and reports on meters, in the same way — questions, a preview, Confirm, the result, and Undo where there is something to undo.
- Repeating reports. "Every Monday e-mail me the new features in the parcels layer", "monthly, a PDF of the parcels by status", "every week the status of all projects". Buddy Pro asks what the report is about — a layer's features (all of them, or those added or changed since the last report; counted by a field; with the fields to list), the projects in Projects (all of them, or one room), or meters — and whether it comes as a PDF or an Excel file, how often (every day, every week on a day, every month on a day), at what time in the workspace's time zone, and who gets it. It goes to you, and to people of the workspace you choose who may read it themselves; never to an address outside the workspace. The preview shows what a report would hold if it ran now, when it first runs, and who gets it. Each run is made as you yourself may read the data at that moment, and each person's copy as they themselves may read it: somebody who can no longer read it gets nothing, and somebody who may not take the layer's rows away as a file (as the app's export rules say for them) gets the words and counts only, without the file. If you lose access to what it reports, or may no longer use Buddy Pro's tasks, the report stops, nothing is sent, and you are told by e-mail. The e-mails come from the workspace's own sender. Ask for my repeating reports to see them, with Pause, Resume and Delete. Undo deletes a repeating report just set up. You keep at most 10.
- Meter alerts. "Alert me when a meter reads over 500", "every morning, the meters with no reading for 3 days". An alert is a repeating report that is sent only when something is found.
- Map sheets. "Print the Water app at 1:2500 on A3 with the parcels layer." Buddy Pro asks for the layers to show (only those you see in the app), the scale, the layout and paper (the workspace's own layouts and the standard ones), and where the sheet is centred (the app's start view, or the chosen layers' features). The sheet is printed as from the map's Print panel, and the PDF is downloaded from the result card when it is ready. Nothing in the app changes.
- Tasks from a message. "Make tasks from this e-mail for Dana, due Friday: …". Paste the message, or add it when asked. Buddy Pro lists the lines that read as things to do, and you choose which become tasks. Only their titles come from the message: who does them, when they are due and in which project or room are taken from your own words, or asked — never from the message itself. Tasks go only where you may make them, and only to people of that room; General is only for the people who have it. The pasted message is not kept: only the tasks' titles, with the task's record, for 30 days. Undo removes the tasks made, while nobody has changed them.
- Projects summaries. "A weekly status of all projects", "summarise the room of the North District project": the projects you see in Projects, with their stage, open and overdue tasks and last activity, or one room's messages and open tasks of the last week. Read-only, as a table, a PDF or an Excel file.
- Meters reports. "Meters with no reading for 3 days in the North District app", "consumption by area this month", "open alerts": from the meters layers of an app you open, within the app's own filter. The customers' names and addresses appear only for the workspace's team, as in the Meters tool. Read-only, as a table, a PDF or an Excel file.
A run is not sent once Buddy Pro has reached the month's allowance when the owners chose to stop there.
Who answers: Auto, Buddy or Buddy Pro
Where Buddy Pro is there for you, the top of Buddy's window has a small switch:
- Auto (the starting choice) — Cartema decides for each question. A question about your data (how many, how much, by what, what changed, a report on an app or a layer, comparisons, lists of features) or a task for Buddy Pro (invite these people, make an app) goes to Buddy Pro; anything else (how to do something, where a button is, finding your way) goes to Buddy.
- Buddy — only Buddy answers: he shows where things are and how to do them. Asked for a report, his answer has an Ask Buddy Pro button that asks Buddy Pro your question there.
- Buddy Pro — every question goes to Buddy Pro.
You can also type the choice in the box: /auto, /buddy or /pro (and /model to see which is on). Words after it are asked at once: "/pro how many parcels are pending?". Your choice is remembered in this browser.
Each answer from Buddy Pro carries a small Buddy Pro mark; the window does not show what each answer uses (the month's usage is on the Plan page; who used how much, for the workspace's owners, on Studio → Usage). Answers from Buddy use Buddy's tokens; answers from Buddy Pro use Buddy Pro's: one never spends the other's. When Auto is unsure about a question, a short check decides, and it counts as Buddy's.
Who can use it
Reports: the workspace's owners and administrators. Editors, viewers and a client's people do not see the switch; when they ask Buddy for a report, he says that reports are not theirs and whom to ask.
Tasks: the workspace's owners choose, in Projects → Settings → Buddy Pro's tasks: Owners and administrators (the starting choice), Owners only, or Listed people — administrators and editors of the workspace picked by name (never a client's people or a viewer). The workspace's owners may always ask for tasks, whichever is chosen, without being listed. A listed editor can ask for tasks in Buddy's window, and each task still only does what that person may do themselves. The choice is checked again at every step, so a person taken off the list can no longer confirm or undo a task.
In the same place the workspace's owners (or Cartema support) can switch on Also each client's owners and administrators, in their own client. A client's owner or administrator then asks in Buddy's window for the people and app tasks of their own client — invitations, roles, access to apps, who can open an app, people's names, who edits which layers — each only as they may do it there by hand. Reports, files and every other task stay with the workspace's team, and so do the workspace's own apps and people and every other client's.
Where it is switched on
Buddy Pro comes with the paid plans that include it: it is there in a workspace whose plan has Buddy Pro tokens, and not on the Free plan. To have it, or more Buddy Pro tokens, change your plan or ask Cartema support with Contact us. It also needs Buddy to be on for the workspace (Projects → Settings). When it is not there for you, Buddy tells you why when you ask him for a report or type /pro: not switched on in this workspace, only for owners and administrators, or this month's Buddy Pro tokens used.
Before the first answer
The first time Buddy Pro would answer you, the window shows its notice: what it reads and sends to the AI service provider, what is kept and that it uses Buddy Pro's tokens. Press Accept and ask and your question is answered; nothing reaches Buddy Pro before you accept. Stop leaves the question unanswered.
What it reads
Buddy Pro reads exactly what you may see, through the same checks as your own pages: only the apps you open, only the layers you see in them, only the rows each app shows (an app's filter, such as a client's area), and only the fields your table shows you. It never reads:
- a dataset marked Not for AI (see below);
- fields hidden from identify and the table, fields kept to the workspace's team (for everyone, owners included), and fields that name people (authors, editors, owners, e-mail addresses and phone numbers);
- the shapes of features — only their area, length and a rounded centre point;
- photos, files, drawings, private layers or conversations.
A field with a list of values (codes with their names) is read by the names: a table by such a field shows "Residential", "Commercial", not 1, 2. Where two codes share a name, the code is added: "Public (3)", "Public (4)".
To answer, Buddy Pro sends what it read — counts, totals and at most 20 rows a question — to an AI service provider. Questions and answers are not kept. Each look-up is recorded for the workspace's owners and administrators: when, by whom, which layer and how many rows, never the question or the values.
The answer, as a PDF or an Excel file
Each answer has a title, a few sentences and up to four tables. The tables are filled by Cartema from the data itself, not typed by the AI, so their numbers are the data's. Areas are in square metres and lengths in metres. A wide table moves sideways with the mouse wheel, two fingers or a swipe; the faded edge shows there is more.
Under the answer, PDF and Excel save it:
- PDF — an A4 page with your workspace's logo and name, the title, the date and who asked, the words and the tables, in the answer's language (right to left in Hebrew).
- Excel — a first sheet with the title and the words, then one sheet per table, with real numbers you can sum and sort; right to left in Hebrew.
Ask for a file in the question ("… as a PDF", "… in Excel") and it is made with the answer; ask for "a file" without saying which, and Buddy asks which you need.
Files are made when you ask and are not kept: an Excel file goes straight to you, and a PDF is deleted from Cartema the moment you download it, or within the hour if you do not. The answer itself stays available for its files for an hour; after that, ask again. Nothing is offered as a file while viewing as someone, nor while the workspace is read-only.
Questions may follow each other: "and only the pending ones?" continues the conversation. New conversation starts again. Buddy Pro's tables stay in your browser tab only, and go when the tab is closed.
What changed between two dates
Buddy Pro tells what changed in a layer from the versions Cartema keeps of edited features: features added, changed and deleted between two dates, how many features were touched and which fields changed most. Versions are kept for as long as the workspace keeps them, so an older period may have none; Buddy says so. In an app that shows only part of a layer (a client's area), deleted features are not counted.
Not for AI
The workspace's owners can keep any dataset from Buddy and Buddy Pro: open it in Studio → Datasets and tick Not for AI under Buddy and Buddy Pro. Neither then reads anything of it — no count, no value, no field name — for anyone. Its layers still appear in Buddy Pro's list of an app's layers, marked as closed to it, so it can say why it cannot answer.
Viewing as someone
While viewing as someone (see View as), Ask Buddy Pro in the bar at the top opens Buddy's window with Buddy Pro alone: it answers as that person sees the data — their apps, their area, their fields. It is a way to check what someone can see. The tokens are yours, and nothing is changed or saved as a file. If you have not accepted Buddy's notice yet, leave the view and accept it in Buddy's window first.
Tokens
Buddy Pro has its own tokens on the plan, beside Buddy's: see Buddy usage. A data question usually takes several times the tokens of an ordinary Buddy answer, since Buddy Pro reads the data before it answers; a report with several tables more. Tasks count too, once you confirm them (see Tasks Buddy Pro does for you); a question, a preview, a cancel and an Undo do not, and the window does not show what each task uses.
The allowance is for one calendar month and does not carry over. What happens when it is used is the owners' choice on the Plan page: continue as extras, billed with the monthly invoice, or stop until next month — then Buddy Pro says so, and Buddy keeps guiding you. Studio → Usage shows the workspace's owners this month's Buddy and Buddy Pro as bars, and under See more each client's share, each person's and the tasks Buddy Pro did for them.